FFFM – Grinding lengths 200 mm – > 1000 mm
For chamfering glass, ceramics and others | Fully production-proof & ultra-stable | Direct driven grinding wheel via powerful medium frequency motor | Use of cooling lubricants: Stainless coolant sump and special motor shaft seal | All workpiece supports nitrided | All parts in the grinding area chemically nickel-plated or anodized | Simplest cooling water supply: Separate container, floor installation
Specifications
Support rail aluminum, anodized
Technical details
- Grinding lengths: 200, 350, 500 mm; on request: 700 ... >1000 mm
- Chamfer angle: Adjustable up to 45° (insert wedges), from 700 mm stepless
- Chamfer width: Up to 5 mm
- Workpiece weight: Up to 20 kg
Typ [mm] |
200 | 350 | 500 | |
Chamfering way |
200 | 350 | 500 | |
Sled bearing surface |
460 | 610 | 760 | |
Space |
390 x 860 | 390 x 1160 | 390 x 1460 | |
Speed |
1‘200-8‘000 U/min | |||
Weight |
70 kg | |||
Prism width |
120 x 43 mm | |||
Medium frequency motor |
230 V, 50 Hz, 650 Watt | |||
Grinding wheel diameter |
70 mm | |||
Colour |
RAL 5015 sky blue | |||
Machine substructure |
Coolant tank installed, accessory drawer |
Options
- Feed-drive, adjustable (pre-reverse, footswitch operation), from 700mm standard
- Mobile machine substructure with built-in coolant supply
For standard machines with grinding length 200-500 mm:
- Insertion wedges for specific chamfering angles
- Custom made clamping devices
- Support for flat, large parts